FabulaTech Forum
        (http://www.virtual-serial-port.com/forum)
      

        Serial Port Solution >> Network Serial Port Kit >> question setup 
        
(Message started by: ito on Nov 9th, 2005, 3:00pm)
Title: question setup
Post by ito on Nov 9th, 2005, 3:00pm
Hello,

I'm wondering if this setup can work.

<device-A> -- serial-cable -- <computer> -- tcp/ip network -- <computer> -- serial cable -- <device-B>

Device A and B should be able to communicate with each other via serial cable. So the computers over the tcp/ip network act like a 'bridge'
Title: Re: question setup
Post by Andrew on Nov 11th, 2005, 2:07am
In general it's possible. We have sent you details on email...
Title: Exactly the same application....
Post by rhenius on Nov 29th, 2005, 8:46am
Hello,

I just scanned the forum for this same problem.
We'd like to connect two proprietary serial hardware devices via physical serial cable to two PCs (WIN XP) which are situated in different locations and connected to the internet over DSL routers.
So, in essence, this is a bridge application, as ito already wrote

Thank you for any hint

rhenius
Title: Re: question setup
Post by Andrew on Nov 30th, 2005, 6:39am
In general we can offer solution for you but there is need to develop one additional program to our Network Serial Port Kit product. We can made such additional program enough quickly but if you will order development. Development cost will include two Network Serial Port Kit licenses and one Serial Port Control license. Please apply to sales@fabulatech.com to receive exact cost of such development.
Title: Re: question setup
Post by ito on Nov 30th, 2005, 10:25am
Will you offer this in the near future ?

Title: Re: question setup
Post by Andrew on Nov 30th, 2005, 11:53pm
Yes sure, we will add this feature in the next program versions.